- Data Sheets
Jaw Crusher is a new rock crushing equipment, which mainly used in metallurgy, chemical industry, building materials, utilities and other materials that often need to move processing operations, especially for highways, railways, hydropower engineering and other stone work flow, customers can use a variety of configurations depending on the type, size and materials of the finished material processing requirements. Jaw crusher station greatly expands the concept field of coarse crushing operations.
Process Description
Jaw crusher is used in primary crushing for stones and bulk materials. It processes various kinds of ore with compression strength not more than 320mp. It has been widely applied in area and is widely used in mining, quarry, metallurgy, building, highway, railway, construction wastes processing, water conservancy, cement production, etc.
The belt and belt pulley are driven by a motor, and the movable jaw moves up and down via eccentric shaft. The angle between fixed jaw and movable jaw becomes smaller when the moving jaw runs down, then the materials are crushed into pieces. It becomes bigger when the movable jaw runs up. The movable jaw plate leaves the fixed jaw plate under the action of tension rod and spring , then the end products come out from the crushing cavity.
Specifications
Features
1.Big capacity and energy saving: no dead zone, feeding and crushing efficiency is greatly improved.
2. Good performance and good stability.
3.The jaw crusher is suitable for crushing ores or minerals whose compressive strength is below 300 Mpa.
4. Crushing cavity is deep and there is no dead area, which improves feeding capacity and output;
5. High reduction ratio and uniform final product size;
6. Spacing piece type discharge-hole adjustment device is reliable and convenient;
7. Reliable and safe lubrication system, convenient replacement of parts and small work load of maintenance;
8. Simple structure, operational reliability and low operation cost.
Process Description
Jaw crusher is used in primary crushing for stones and bulk materials. It processes various kinds of ore with compression strength not more than 320mp. It has been widely applied in area and is widely used in mining, quarry, metallurgy, building, highway, railway, construction wastes processing, water conservancy, cement production, etc.
The belt and belt pulley are driven by a motor, and the movable jaw moves up and down via eccentric shaft. The angle between fixed jaw and movable jaw becomes smaller when the moving jaw runs down, then the materials are crushed into pieces. It becomes bigger when the movable jaw runs up. The movable jaw plate leaves the fixed jaw plate under the action of tension rod and spring , then the end products come out from the crushing cavity.
Specifications
Features
1.Big capacity and energy saving: no dead zone, feeding and crushing efficiency is greatly improved.
2. Good performance and good stability.
3.The jaw crusher is suitable for crushing ores or minerals whose compressive strength is below 300 Mpa.
4. Crushing cavity is deep and there is no dead area, which improves feeding capacity and output;
5. High reduction ratio and uniform final product size;
6. Spacing piece type discharge-hole adjustment device is reliable and convenient;
7. Reliable and safe lubrication system, convenient replacement of parts and small work load of maintenance;
8. Simple structure, operational reliability and low operation cost.
Inquiry
More Products
